01
Dissolved molecular hydrogen
H2 is molecular hydrogen dissolved in water, with concentration expressed in PPB.
HWB01 / Molecular hydrogen system
Hydrogen Water Bottle.Fresh H2 in Minutes.
Fulmor is a hydrogen water bottle with a separate SPE/PEM electrolysis tank and a 400 ml drinking chamber. Choose a 2- or 5-minute cycle, with a target hydrogen concentration of up to 8500 PPB.
HWB01 BPA-free Tritan USB-C
400 ml for drinking.
20 ml dedicated to electrolysis.
Molecular science / 01
Small molecule.
Clear measurement.
Molecular hydrogen (H2) can dissolve in water, and its dissolved concentration is expressed in parts per billion (PPB). Fulmor uses two timed cycles with target concentrations of 4000 PPB and up to 8500 PPB. Research continues to explore molecular hydrogen and wellness; findings should not be read as guaranteed health outcomes.
- Quick
- 02:004000 PPB target
- High output
- 05:00TARGET: UP TO 8500 PPB
02
Prepared when needed
Two timed cycles prepare hydrogen-rich water before drinking. Actual output varies with water and use conditions.
03
Research in progress
Research on molecular hydrogen is ongoing and should not be read as a guaranteed health outcome.
Effortless daily ritual / 02
Designed for seamless daily hydration.
Three simple steps: fill each chamber, choose a cycle, and press once to begin.
Fill the electrolysis tank
Add water to the dedicated 20 ml electrolysis tank as directed in the product guide.
Fill the drinking chamber
Add up to 400 ml of clean drinking water.
Select and start
Choose the 2- or 5-minute cycle, start electrolysis, and drink after the cycle completes.
Dual-tank architecture / 03
Two tanks. Separate roles.
UP TO 8500 PPB5-minute target cycle; output varies with water and operating conditions.
A dedicated 20 ml electrolysis tank sits apart from the 400 ml drinking chamber. The separated layout is designed to keep the reaction zone and drinking-water zone functionally distinct while SPE/PEM electrolysis runs.
01400 ml drinking chamberBPA-free Tritan
0220 ml electrolysis tankDedicated reaction zone
03SPE / PEM moduleSeparated electrolysis layout
Designed around daily concerns / 04
What you notice. What we considered.
Reaction-zone separation, secure closure, material clarity, and care-ready construction address everyday taste, carrying, material, and durability concerns.
Taste-conscious separation
The 20 ml electrolysis tank sits apart from the 400 ml drinking chamber, keeping the reaction zone separate from the water you drink.
Secure closure
The cap and tank components are designed to seat fully for everyday carrying. Close every part completely and follow the product guide for transport and storage.
Material clarity
The drinking chamber uses BPA-free Tritan, while the electrolysis components remain in the dedicated reaction tank.
Care-ready construction
An included cleaning brush, USB-C charging, and an LED status display support a repeatable daily-use and care routine.
Designed for the day / 05
One system. Four settings.
01 / 0401
Work
Within reach during focused hours.
Specifications / 06
Performance,
clearly specified.
- Model
- HWB01
- Target hydrogen concentration
- 2 min: 4000 PPB / 5 min: up to 8500 PPB
- Tank system
- 400 ml drinking + 20 ml electrolysis
- Electrolysis architecture
- Separated SPE / PEM
- Drinking chamber material
- BPA-free Tritan
- Dimensions
- 75 × 75 × 225.3 mm
- Net weight
- 495 g
- Display / charging
- LED status display · USB-C
Fulmor FAQ / 07
Before You Order.
Hydrogen concentration figures are target values and may vary with water and use conditions. Research on molecular hydrogen is ongoing. Fulmor is a wellness product and is not intended to diagnose, treat, cure, or prevent disease.
What is hydrogen water?
Drinking water with dissolved molecular hydrogen (H2). Its concentration is measured in PPB.
How do I use Fulmor safely?
Follow the product manual. Use suitable water and a clean, undamaged bottle. Stop use if the unit is damaged or behaves unusually, and ask a qualified professional about personal health concerns.
Why choose hydrogen-rich water?
It offers a way to add dissolved H2 to a daily hydration routine. Research is ongoing, so health benefits and individual outcomes are not guaranteed.
What does the separated design do?
It separates the 20 ml electrolysis tank from the 400 ml drinking chamber, giving the reaction zone and drinking-water zone distinct roles.
What is the difference between the two cycles?
The 2-minute cycle targets 4000 PPB; the 5-minute cycle targets up to 8500 PPB. Actual concentration varies with operating conditions.
What water should I use?
Use clean drinking water that meets the product manual. Water composition may affect operation.
How do I clean the bottle?
Follow the product manual and use the included cleaning brush. Cleaning frequency depends on the water and how often you use the bottle.
What is included?
The HWB01 unit, mineral-water adapter, user manual, product documentation, cleaning brush, and USB-C cable.
Fulmor
Your H₂ routine.
Starts here.
HWB01 pairs a 400 ml drinking chamber with a dedicated 20 ml electrolysis tank, two timed cycles, a status display, and USB-C charging.
UP TO 8500PPB target
2 / 5 MINCycle modes
400 MLDrinking volume